- Home
- ยป
- Our Products
- »
- Carbon Steel Seamless Pipes
Carbon Steel Seamless Pipes
EN 10219 S235JRH Pipe Tube
Product Brochure
Steel Grade | EN 10219 /ANSI/ ASME B36.10M DIN 17120 S235JRH |
Unit Pipe Length | Customized length ranging from 6 m to 11 m |
Size | 20- 200 MM OD |
Material | BS EN 10219 Structural hollow section Chemical Structure C Si Mn P S 0.17 - 1.4 0.035 0.035 Col |
EN 10219 S235JRH Specification
Length | 6.0 m +/- 0.05 m Customized length ranging from 6 m to 11 m may be supplied. |
Straightness | Minimum 1 : 200th of any length measured along the centre line (mill straightened condition) unless otherwise specifically arranged. |
Twist tolerance | Maximum 2 mm ± 0.05 mm/m length-measured relative vertical shift of any adjacent corner of the section, measured by keeping one side on flat surface. |
End Finish | Plain ended-Mechanically sheared, mill-cut finish without further machining. |
Surface Finish / Chemical Properties | Black without any surface treatment of oiling or varnishing. |
Raw Material | Sulphur content: 0.05% max, phosphorus content: 0.05% max, equivalent carbon percentage well within specified weldability limits with matching physical properties. For corrosion resistant steel in Cu-bearing variety, refer to the WRS section. |
Weldability | Tata Structura Steel Hollow Sections are weldable with standard M.S. Electrodes without any pre-heating. |
Packing | Bundled by sealing metal strap and each bundle is labelled for size, measurement, lot number etc. Approximate weight of each bundle is 1.5 Mt (+/-500 kg). |
DIN 2391 Pipe Din 2391 St35 St45 St52 Seamless Precision Steel Tubes
Material Grade | DIN 2391 Pipe Din 2391 St35 St45 St52 Seamless Precision Steel Tubes |
Material | Carbon Steel |
Brand | PUSHPAK |
Usage/Application | Industrial and Mechanical, Automotive |
Type | 4 - 260 mm |
Model Name/Number | Delivery condition:BK ,BKW,BKS,GBK,NBK |
Thickness | 0,5 - 25 mm |
Surface Finish | Mill Finished |
Nominal Size | (Nominal Size ): 4 - 260 mm |
Unit Pipe Length | 6m |
DIN 2391 applies to seamless precision steel tubes and in compliance with ISO/DIN 3304, those tube dimensions have been selected from the range of manufacture dimensions which are mainly used as design elements.
If tubes having the tolerances and are produced according to the technical conditions of deivery as specified in this Standard are to e used as pipelines, then the dimensions specified in DIN 2448 may from time to time be used. These tubes must be ordered according to quality grade C.
DIN 2391 Pipe Seamless Precision Steel Tubes Size:Outside Diameter (Nominal Size ): 4 - 260 mm
Wall Thickness: 0,5 - 25 mm
Delivery condition:BK ,BKW,BKS,GBK,NBK
Application: Industrial and Mechanical, Automotive
Notes:
- Steel grades: St 35, St 45, St 52
- Length up to 9 m.
- Test certificates according to DIN EN 10204.
STRUCTURE SEAMLESS PIPES
Product Brochure
Product |
Seamless Structural Pipe |
Application |
Used in the general structure and the mechanism Industry |
Size |
OD: 10.3-762mm |
WT: 6-35mm |
|
LENGTH: 5.8/6/11.8/12m |
|
Pipe Standard |
ASTM A53 ASTM A519 ASTM A500 ASTM A252 |
JIS G3441/G3445 |
|
EN 10210/10297 |
Standard Structural Steel Pipes & Tubes Specifications & Grades
ASTM A53/ASME SA53 Grades A & B;
ASTM A519/ASME SA519 Grades 1020,1026,4140,4142;
ASTM A252/ASME SA252 S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H;
ASTM A500/ASME SA500 Grades A, B, C, D;
EN10297-1 Grades E235, E275, E315, E355;
EN10210-1 Grades S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H;
ASTM A53 |
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
ASTM A519 |
Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
ASTM A500 |
Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
ASTM A252 |
Standard Specification for Welded and Seamless Steel Pipe Piles |