- Home
- ยป
- Our Products
- »
- NICKEL ALLOYS STEELS
NICKEL ALLOYS STEELS
Inconel Nickel Alloy
Product Brochure
Grade | 201 |
Color | Silver |
Surface Finish | Polished |
Shape | Round |
Material | Nickel Alloy |
-
Special Alloy Incoloy 800H Hastelloy C-276 Inconel 600 Incoloy 800HT Hastelloy C-4 Inconel 601 Incoloy 825 Hastelloy B-2 Inconel 625 Incoloy 901 Hastelloy C-22 Inconel 718 Incoloy 926 Hastelloy B Inconel X-750 GH4169 Nimonic 80A 3J53 GH2132 Monel 400 904L 4J29 GH4145 Monel K-500 4J36 GH3128 254SMO/F44 Invar 36 GH3030 Incoloy A-286 Inconel 725 Incoloy 925 Incoloy 800 Hastelloy C Hastelloy X Nimonic 80A Nickel 200 Nickel 201 Nitronic 50 (XM-19) Nitronic 60 F15 F55 (S32760) F53 (2507) F51 (S31803) 329 (S32900) Alloy31 Alloy20Cb-3 17-4PH (S17400) 17-7PH (S17700) 15-5PH (XM-12) 15-7MoPH 253Ma A4 RS-2 Product Type Specification Forgings round Φ30-Φ350 square 30x30-350x350 Hot rolling material cake, flange, ring, sleeve Agreement round bar Φ8.5-Φ80 flat bar 4x60-50x300 Cold drawn material (Polishing) bar Φ2-Φ60 Tube & Pipe pierced billet Φ76-Φ200 cold drawn & cold rolled pipe Φ6.0x0.6mm-Φ200x20mm
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
17-4 PH ASTM A564 ASTM A693 17-4 PH AISI 630 S17400 Stainless Steel Pipe
Product Brochure
Material Grade | 17-4 PH Stainless Steel 630 Stainless Steel ASTM A564 ASTM A693 17-4 PH AISI 630 S17400 Stainless S |
Material | 17-4 PH Stainless Steel 630 Stainless Steel ASTM A564 ASTM A693 17-4 PH AISI 630 S17400 Stainless S |
Shape | Round |
Usage/Application | Variety of springs and washers Aerospace parts Heat exchangers Power boilers Hig |
Single Piece Length | 4-7 M |
Size | 15-250 NB |
Melting Point | up to 300 DegreeC / 572 DegreeF |
Density | Density Specific Gravity: 7.78 |
Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved. The grade should not be used at temperatures above 300°C (572°F) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to grade 304 or 430. chromium-copper stainless steel standardised as UNS S17400, 17-4PH is highly resistant to stress corrosion, has good machinability, short-term, low temperature heat treatments that minimise warpage and scaling, and is considered to be more cost effective than many high nickel non-ferrous alloys.
Due to the high strength of 17-4PH, its main use is in aerospace and other high technology industries such as offshore, in gears, valves, turbine blades, nuclear waste casks, moulding dies and shafts, as well as having been tested in the petrochemical, petroleum, paper, dairy and food processing industries, and in such applications as boat shafting. The unique combination of properties within 17-4PH makes this alloy an effective solution to many design and production problems.Standard Specification:
ASTM A564 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
ASTM A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
254 SMO Seamless Tubes UNS S31254
Product Brochure
Thickness | ASTM A213 ASME SA 213 S31254 254 SMo Standard Specification: |
Brand | IMPORTED |
Diameter | 1/2" TO 10" NB |
Shape | Round |
Unit Pipe Length | 6 meter |
Material Grade | 254 SMO Tubing 254SMO Pipe S31254 Tubing 6MO Seamless Tubing Pipe 254 SMO Tubing 254SMO Pipe S3125 |
Pipe Fluid | Chemical, Water, Gas |
Surface Finish | Mill Finished |
Type | Welded, Seamless |
Material | 254 SMO Tubing 254SMO Pipe S31254 Tubing 6MO Seamless Tubing Pipe 254 SMO Tubing 254SMO Pipe S3125 |
254 SMO Tube is an austenitic stainless steel with increased molybdenum and nitrogen contents, suitable for use in seawater, oil and gas piping systems on offshore production platforms and aggressive chloride presence. With an excellent resistant to pitting, crevice corrosion and to stress-corrosion cracking.
FASTWELL is a manufacturer, exporter and leader supplier of a qualitative range of SMO 254 Tubes in India and worldwide that are being designed as per the PED approved, ISO certified , NORSOK approved, NACE approved, The American Petroleum Institute specification, ISO 17025, ISO 9001:2008, 18001:2007, 14001:2004, Govt. of India recognized Export House for ASTM A249 254 SMO Welded Tube. It is a combination of Molybdenum and Nitrogen alloyed super austenitic stainless steel with low Carbon content.
Table of contents
- SMO UNS S31254 Tube Price
- ASTM A269 SMO 254 Tube Specification
- SMO WERKSTOFF NR. 1.4547 Tube Sizes
- Alloy 254 SMO Tube Stock
- 254 SMO Tube Pressure Rating
- SMO DIN NR. 1.4547 Tube Composition
- 254 SMO Tube Mechanical Properties
254 SMO tubing composition & technical information
SMO DIN NR. 1.4547 Tube Composition
SMO 254 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
17.5 – 18.5 | 0.02 max | 6 – 6.5 | 1 max | 0.8 max | – | 0.5 – 1 | 0.01 max | 0.03 max | 19.5 – 20.5 |
SMO 254 Tube Mechanical Properties
Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
8.0 g/cm3 | 1320-1390 ℃ | 300 | 650 | 35 % |
Equivalent Grades for 254 SMO Tubing
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | SIS | GOST |
SMO 254 | S31254 | 1.4547 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 | – | 2378 | – |
ASTM A312 UNS S31254 Seamless Tube and 254 SMO Tubing
Product Brochure
Material Grade | SA 213 UNS S31254 Seamless Tube and A269 254 SMO |
Material | 254 SMO Pipe |
Brand | IMPORTED |
Usage/Application | Industrial |
Type | Hot-Finished, Annealed, Cold-Drawn, Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Thickness | W. T.: 0.5 to 20mm |
Surface Finish | Mill Finished |
Unit Pipe Length | Single Random, Double Random & Cut Length. |
Design Pressure Case I And Case II | Square, Hollow, Hydraulic, Straight, Rectangular, Round |
Manufactured By | Sumitomo Metals, Japan Nippon Steel Corporation, Japan Kobe Special Tube, Japan Sanyo Special Steel |
254 SMO Pipe Specification Buy SCH40 Din 1.4547 Stainless Steel Pipe and A312 254 SMO Instrument Tubing in various size and wall thickness at factory price
Grades : EN 1.4547 / UNS S31254 (F44).
Size : 1/8” to 48”, Seamless Pipes up to 24”.
Outer Diameter : 0.3mm – 10mm.
Thickness : 0.4mm up to 30.00 mm, Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH.
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Surface Finishing : Bright, Polish & Black.
Our SMO 254 Stainless Steel Pipe, conforms to NACE MR0175/ISO 15156.
Table of contents
- 254 SMO Pipe Specification
- ASTM A312 UNS S31254 Seamless Pipe
- Alloy 254 6mo Welded Pipe
- 1.4547 Stainless Steel Pipe Types
- F44 UNS S31254 Pipe Dimensions & Weight
- F44 UNS S31254 Pipe Chemical Composition
- Stainless Steel S31254 1.4547 Pipe Mechanical Properties
- Equivalent Grades for ASME SA 312 UNS S31254 Pipes
- UNS S31254 F44 Pipe Price in India
Additional Information:
- Packaging Details: WOODEN CARATE
Nickel Alloy Pipes And Tube
Product Brochure
Size/Diameter | 1/2-3 inch |
Application | Chemical Handling |
Material | Nickel |
Single Piece Length | 18 meter, 6 meter |
Shape | Round |
Nickel and Nickel Alloy Tubes | |
ASTM B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825) | |
ASTM B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube UNS N04400(Monel 400) | |
ASTM B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube UNS N06690(Inconel 690) | |
ASTM B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT) | |
ASTM B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube UNS N08825(Incoloy 825) | |
ASTM B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube UNS N06625(Incoloy 625) | |
ASTM B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube UNS N10276(Hastelloy C276) | |
ASTM B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube UNS N04400(Monel 400); UNS N06625(Incoloy 625) |
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Monel Nickel Alloy Tube
Product Brochure
Shape | Round |
Material | Nickel Alloy |
Grade | 200 |
Surface Finish | Polished |
- PUSHPAK, General Pipes and Tubes product are available in seamless and welded pipes in materials as per ASTM & ASME standards in grades like;
- Stainless Steel – TP 304/L, TP 304H, TP 316/L , TP308, TP 309, TP 310/s, TP 310Mo, TP 317L, TP 317H, TP 321, TP 347,TP 347H, TP 904L
- Nickel Alloys – Alloy 20, Alloy 200/201, Alloy 400, Alloy 600, Alloy 601, Alloy 625, Alloy 800/H/HT, Alloy 825, Alloy 840, Alloy C-276, Alloy C-22
- Duplex – S31803/S32205
- Super Duplex – S32750 , S32760, S31254(SMO254)
- Outer Diameter Range – 6MM to 168.3MM (Seamless)
- Outer Diameter Range – 6MM to 273.0MM (Welded)
- Thickness Range – 0.7MM to 6MM
- Length Range – 3Mtr sto 12Mtr
- Chemical Industry
- LNG Pipelines
- Sea Water Pipelines
- Food and Beverages
- Oil and Gas Pipelines, etc.
Nickel Alloys also known as Super Alloys are those metals that contain more than 30% nickel. It is a hard and ductile metal of silver-white color. It has high corrosion resistance suitable for both high and low temperature applications. Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc. Nickel has high metallurgical stability making it suitable for hard-metal industry. It also acts as a catalyst in various chemical processes.
Nickel alloys tubing products are made available at shalco in seamless and welded tubes and pipesCharacteristics- Corrosion & oxidation resistance
- Ductility
- Brilliant polish
- Excellent machine strength
- High creep resistance
- High temperature resistance
- Nickel 200 / 201
- Monel 400
- Monel K500
- Inconel 600
- Inconel 601
- Inconel 625
- Inconel 718
- Incoloy 800
- Incoloy 825
- Hastelloy C276
- Hastelloy C22
- Hastelloy B2
- Alloy 20
- 904L
- Pipes
- Tubes
- Fittings
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Nickel Pipe
Product Brochure
Shape | Round |
Material | Nickel |
Single Piece Length | 6 meter, 18 meter |
Surface Finishing | Powder Coated |
Equivalent Materials |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Hastelloy Nickel Alloy
Product Brochure
Material | Nickel Alloy |
Unit Length | 12 m, 6 m |
Shape | Round |
Color | Silver |
Surface Finishing | Polished |
- Nickel Alloys – Alloy 20, Alloy 200/201, Alloy 400, Alloy 600, Alloy 601, Alloy 625, Alloy 800/H/HT, Alloy 825, Alloy 840, Alloy C-276, Alloy C-22
- Duplex – S31803/S32205
- Super Duplex – S32750 , S32760, S31254(SMO254)
- Outer Diameter Range – 6MM to 168.3MM (Seamless)
- Outer Diameter Range – 6MM to 273.0MM (Welded)
- Thickness Range – 0.7MM to 6MM
- Length Range – 3Mtr sto 12Mtr
- Chemical Industry
- LNG Pipelines
- Sea Water Pipelines
- Food and Beverages
- Oil and Gas Pipelines, etc.
Nickel Alloys also known as Super Alloys are those metals that contain more than 30% nickel. It is a hard and ductile metal of silver-white color. It has high corrosion resistance suitable for both high and low temperature applications. Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc. Nickel has high metallurgical stability making it suitable for hard-metal industry. It also acts as a catalyst in various chemical processes.
Nickel alloys tubing products are made available at shalco in seamless and welded tubes and pipesCharacteristics- Corrosion & oxidation resistance
- Ductility
- Brilliant polish
- Excellent machine strength
- High creep resistance
- High temperature resistance
- Nickel 200 / 201
- Monel 400
- Monel K500
- Inconel 600
- Inconel 601
- Inconel 625
- Inconel 718
- Incoloy 800
- Incoloy 825
- Hastelloy C276
- Hastelloy C22
- Hastelloy B2
- Alloy 20
- 904L
- Pipes
- Tubes
- Fittings
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Titanium Alloy Tube
Product Brochure
Color | Silver |
Grade | Grade 1 / 2 / 3 / 4 / 5 / 6 / 7 TUBES |
Size/Diameter | 6.35 mm OD To 152 mm OD |
Surface Finish | Polished |
Shape | Round |
Material | Titanium ASTM B338,ASTM B861,DIN 17 861 |
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.