EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- NICKEL ALLOYS , MONAL ,INCONEL ,HASTELLOY STEELS.
NICKEL ALLOYS , MONAL ,INCONEL ,HASTELLOY STEELS.
Nickel Steel Alloys Monel / Titanium/ Inconel/Duplex Steel/Super Duplex Steel / Hastelloy / Inconel / ASTM / ASME SB 163 / 165 / 167 / 464/ 517 / 619 / 622 / 626 / 704 / 705./ UNS S32205 Duplex | UNS S32750 SuperDuplex | UNS S32760 SuperDuplex / Grade: UNS 2200 (NICKEL 200), UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8020 (ALLOY 20 / 20 CB 3), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276)
17-4 PH ASTM A564 ASTM A693 17-4 PH AISI 630 S17400 Stainless Steel Pipe
Product Price: Rs 500 / KgGet Best Price
Product Brochure
Product Details:
| Material Grade | 17-4 PH Stainless Steel 630 Stainless Steel ASTM A564 ASTM A693 17-4 PH AISI 630 S17400 Stainless S |
| Material | 17-4 PH Stainless Steel 630 Stainless Steel ASTM A564 ASTM A693 17-4 PH AISI 630 S17400 Stainless S |
| Shape | Round |
| Usage/Application | Variety of springs and washers Aerospace parts Heat exchangers Power boilers Hig |
| Single Piece Length | 4-7 M |
| Size | 15-250 NB |
| Melting Point | up to 300 DegreeC / 572 DegreeF |
| Density | Density Specific Gravity: 7.78 |
Mechanical properties can be optimized with heat treatment. Very high yield strength up to 1100-1300 MPa (160-190 ksi) can be achieved. The grade should not be used at temperatures above 300°C (572°F) or at very low temperatures. It has adequate resistance to atmospheric corrosion or in diluted acids or salts where its corrosion resistance is equivalent to grade 304 or 430. chromium-copper stainless steel standardised as UNS S17400, 17-4PH is highly resistant to stress corrosion, has good machinability, short-term, low temperature heat treatments that minimise warpage and scaling, and is considered to be more cost effective than many high nickel non-ferrous alloys.
Due to the high strength of 17-4PH, its main use is in aerospace and other high technology industries such as offshore, in gears, valves, turbine blades, nuclear waste casks, moulding dies and shafts, as well as having been tested in the petrochemical, petroleum, paper, dairy and food processing industries, and in such applications as boat shafting. The unique combination of properties within 17-4PH makes this alloy an effective solution to many design and production problems.Standard Specification:
ASTM A564 Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
ASTM A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
Yes! I am InterestedRequest A Callback
ASTM A312 UNS S31254 Seamless Tube and 254 SMO Tubing
Product Price: Rs 400 / KgGet Best Price
Product Brochure
Product Details:
| Material Grade | SA 213 UNS S31254 Seamless Tube and A269 254 SMO |
| Material | 254 SMO Pipe |
| Brand | IMPORTED |
| Usage/Application | Industrial |
| Type | Hot-Finished, Annealed, Cold-Drawn, Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Thickness | W. T.: 0.5 to 20mm |
| Surface Finish | Mill Finished |
| Unit Pipe Length | Single Random, Double Random & Cut Length. |
| Design Pressure Case I And Case II | Square, Hollow, Hydraulic, Straight, Rectangular, Round |
| Manufactured By | Sumitomo Metals, Japan Nippon Steel Corporation, Japan Kobe Special Tube, Japan Sanyo Special Steel |
254 SMO Pipe Specification Buy SCH40 Din 1.4547 Stainless Steel Pipe and A312 254 SMO Instrument Tubing in various size and wall thickness at factory price
Grades : EN 1.4547 / UNS S31254 (F44).
Size : 1/8” to 48”, Seamless Pipes up to 24”.
Outer Diameter : 0.3mm – 10mm.
Thickness : 0.4mm up to 30.00 mm, Schedules 5, 10S, 10, 30, 40S, 40, 80, 80S, XS, 160, XXH.
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Surface Finishing : Bright, Polish & Black.
Our SMO 254 Stainless Steel Pipe, conforms to NACE MR0175/ISO 15156.
Table of contents
- 254 SMO Pipe Specification
- ASTM A312 UNS S31254 Seamless Pipe
- Alloy 254 6mo Welded Pipe
- 1.4547 Stainless Steel Pipe Types
- F44 UNS S31254 Pipe Dimensions & Weight
- F44 UNS S31254 Pipe Chemical Composition
- Stainless Steel S31254 1.4547 Pipe Mechanical Properties
- Equivalent Grades for ASME SA 312 UNS S31254 Pipes
- UNS S31254 F44 Pipe Price in India
Additional Information:
- Packaging Details: WOODEN CARATE
Yes! I am InterestedRequest A Callback
254 SMO Seamless Tubes UNS S31254
Product Price: Rs 1,000 / KgGet Best Price
Product Brochure
Product Details:
| Thickness | ASTM A213 ASME SA 213 S31254 254 SMo Standard Specification: |
| Brand | IMPORTED |
| Diameter | 1/2" TO 10" NB |
| Shape | Round |
| Unit Pipe Length | 6 meter |
| Material Grade | 254 SMO Tubing 254SMO Pipe S31254 Tubing 6MO Seamless Tubing Pipe 254 SMO Tubing 254SMO Pipe S3125 |
| Pipe Fluid | Gas, Chemical, Water |
| Surface Finish | Mill Finished |
| Type | Welded, Seamless |
| Material | 254 SMO Tubing 254SMO Pipe S31254 Tubing 6MO Seamless Tubing Pipe 254 SMO Tubing 254SMO Pipe S3125 |
254 SMO Tube is an austenitic stainless steel with increased molybdenum and nitrogen contents, suitable for use in seawater, oil and gas piping systems on offshore production platforms and aggressive chloride presence. With an excellent resistant to pitting, crevice corrosion and to stress-corrosion cracking.
FASTWELL is a manufacturer, exporter and leader supplier of a qualitative range of SMO 254 Tubes in India and worldwide that are being designed as per the PED approved, ISO certified , NORSOK approved, NACE approved, The American Petroleum Institute specification, ISO 17025, ISO 9001:2008, 18001:2007, 14001:2004, Govt. of India recognized Export House for ASTM A249 254 SMO Welded Tube. It is a combination of Molybdenum and Nitrogen alloyed super austenitic stainless steel with low Carbon content.
Table of contents
- SMO UNS S31254 Tube Price
- ASTM A269 SMO 254 Tube Specification
- SMO WERKSTOFF NR. 1.4547 Tube Sizes
- Alloy 254 SMO Tube Stock
- 254 SMO Tube Pressure Rating
- SMO DIN NR. 1.4547 Tube Composition
- 254 SMO Tube Mechanical Properties
254 SMO tubing composition & technical information
SMO DIN NR. 1.4547 Tube Composition
| SMO 254 | Ni | C | Mo | Mn | Si | Fe | Cu | S | P | Cr |
| 17.5 – 18.5 | 0.02 max | 6 – 6.5 | 1 max | 0.8 max | – | 0.5 – 1 | 0.01 max | 0.03 max | 19.5 – 20.5 |
SMO 254 Tube Mechanical Properties
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.0 g/cm3 | 1320-1390 ℃ | 300 | 650 | 35 % |
Equivalent Grades for 254 SMO Tubing
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | SIS | GOST |
| SMO 254 | S31254 | 1.4547 | Z1 CNDU 20.18.06Az | X1CrNiMoCuN20-18-7 | – | 2378 | – |
Yes! I am InterestedRequest A Callback
Hastelloy Nickel Alloy
Product Price: Rs 3,000 / KgGet Best Price
Product Brochure
Product Details:
| Material | Nickel Alloy |
| Unit Length | 6 m, 12 m |
| Shape | Round |
| Color | Silver |
| Surface Finishing | Polished |
- Nickel Alloys – Alloy 20, Alloy 200/201, Alloy 400, Alloy 600, Alloy 601, Alloy 625, Alloy 800/H/HT, Alloy 825, Alloy 840, Alloy C-276, Alloy C-22
- Duplex – S31803/S32205
- Super Duplex – S32750 , S32760, S31254(SMO254)
- Outer Diameter Range – 6MM to 168.3MM (Seamless)
- Outer Diameter Range – 6MM to 273.0MM (Welded)
- Thickness Range – 0.7MM to 6MM
- Length Range – 3Mtr sto 12Mtr
- Chemical Industry
- LNG Pipelines
- Sea Water Pipelines
- Food and Beverages
- Oil and Gas Pipelines, etc.
Nickel Alloys also known as Super Alloys are those metals that contain more than 30% nickel. It is a hard and ductile metal of silver-white color. It has high corrosion resistance suitable for both high and low temperature applications. Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc. Nickel has high metallurgical stability making it suitable for hard-metal industry. It also acts as a catalyst in various chemical processes.
Nickel alloys tubing products are made available at shalco in seamless and welded tubes and pipesCharacteristics- Corrosion & oxidation resistance
- Ductility
- Brilliant polish
- Excellent machine strength
- High creep resistance
- High temperature resistance
- Nickel 200 / 201
- Monel 400
- Monel K500
- Inconel 600
- Inconel 601
- Inconel 625
- Inconel 718
- Incoloy 800
- Incoloy 825
- Hastelloy C276
- Hastelloy C22
- Hastelloy B2
- Alloy 20
- 904L
- Pipes
- Tubes
- Fittings
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Yes! I am InterestedRequest A Callback
Nickel Pipe
Product Price: Rs 2,500 / KgGet Best Price
Product Brochure
Product Details:
| Alloy Grade | Nickel 200 |
| Pipe Type | Seamless |
| Outer Diameter | 6 mm |
| Schedule | SCH 10 |
| Pipe Length | 6 m |
| Manufacturing Standard | ASTM B161 |
| Shape | Round |
| Material | Nickel |
| Single Piece Length | 6 meter, 18 meter |
| Surface Finishing | Powder Coated |
|
Equivalent Materials |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Yes! I am InterestedRequest A Callback
Stelite6 / Cobalt6 / Haynes6 Bright steel Bar
Product Price: Rs 2,500 / KgGet Best Price
Minimum Order Quantity: 100 Kg
Product Brochure
Product Details:
| Alloy Family | Stelite6 / Cobalt6 / Haynes6 Bright Bar |
| Form | Stelite6 / Cobalt6 / Haynes6 Bright Bar |
| Application | Aerospace |
| Standard | EN Standard |
- Cobalt (Co): Remainder (Base)
- Chromium (Cr): 28.27%
- Tungsten (W): 4.41%
- Carbon (C): 0.65%
- Iron (Fe): 0.84%
- Nickel (Ni): 1.20%
- Silicon (Si): 1.28%
- Manganese (Mn): 0.11%
- Hardness: Retains high hardness at temperatures exceeding 500°C.
- Oxidation Resistance: Up to 1095°C.
- Density: ~8344 kg/m³.
- Structure: Primarily composed of cobalt solid-solution FCC.
- Form: Available as welding wire/rods (for hardfacing) or in engineered components.
- Hardfacing: Applied to stainless steel (e.g., AISI 420 or 304) to enhance wear resistance in turbine blades, pump impellers, and valves.
- Industrial Components: Used in environments requiring high cavitation and corrosion resistanc
- Cobalt Alloy 6B (UNS R30006) bright steel bars are high-performance, cobalt-chromium-tungsten alloy bars known for extreme wear resistance, corrosion resistance, and the ability to maintain hardness at high temperatures (up to 800°C/1000°F).
- Specifications and Standards
- Grade: Cobalt Alloy 6B (UNS R30006)
- Standards: AMS 5894, ASTM, ASME, DIN, ISO
- Condition: Solution Heat Treated
- Common Certification: NACE MR0175/ISO 15156
- Cobalt (Co): Balance (approx. 50-60%)
- Chromium (Cr): 28.0 - 32.0
- Tungsten (W): 3.50 - 5.50
- Carbon (C): 0.90 - 1.40
- Nickel (Ni): 3.0 max
- Iron (Fe): 3.0 max
- Silicon (Si): 2.0 max
- Manganese (Mn): 2.0 max
- Hardness: 36-40 HRC (Rc 33-43)
- Ultimate Tensile Strength: 130 ksi (900–1000 MPa)
- Yield Strength (0.2%): 70-89 ksi (480-621 MPa)
- Elongation: 5% - 12%
- Density: 8.39 - 8.69 g/cm³
- Diameter Range: 3.17 mm to 350 mm (1/8 inch to 3 inches commonly)
- Length: 1 to 6 meters, with custom cut lengths available
- Finish: Bright Polished, Centerless Ground, Cold Drawn, or Peeled
- Shapes: Round, Square, Hexagon, Flat
- Wear Resistance: Exceptional resistance to abrasion, erosion, galling, and seizing.
- Corrosion Resistance: High resistance to various chemical environments.
- Haynes 25 (also known as L-605 or UNS R30605) is a high-performance cobalt-nickel-chromium-tungsten alloy that provides excellent high-temperature strength, oxidation resistance up to 2000°F (1093°C),
- Chemical Composition (Nominal % by Weight)
- Cobalt (Co): Balance (approx. 50% min)
- Nickel (Ni): 9.0 - 11.0%
- Chromium (Cr): 19.0 - 21.0%
- Tungsten (W): 14.0 - 16.0%
- Iron (Fe): 3.0% max
- Manganese (Mn): 1.0 - 2.0%
- Silicon (Si): 0.4% max
- Carbon (C): 0.05 - 0.15%
- Density: 9.13 g/cm³ (0.33 lb/in³)
- Melting Point: 1382°C (2520°F)
- Oxidation Resistance: Up to 1093°C (2000°F)
- High-Temperature Strength: Solid-solution-strengthened, maintaining high strength at elevated temperatures.
Additional Information:
- Packaging Details: loose
Yes! I am InterestedRequest A Callback
Monel Nickel Alloy Tube
Product Price: Rs 3,000 / KgGet Best Price
Product Brochure
Product Details:
| Shape | Round |
| Material | ASTM B619-19, ASTM B705-17, ASTM B514-05, ASTM B515-20, ASTM B474-19. |
| Grade | UNS N10276, UNS N08825, UNS N08811, UNS N08810, UNS N06625, UNS N04400. |
| Surface Finish | Polished |
- Nickel Alloys – Alloy 20, Alloy 200/201, Alloy 400, Alloy 600, Alloy 601, Alloy 625, Alloy 800/H/HT, Alloy 825, Alloy 840, Alloy C-276, Alloy C-22
- Duplex – S31803/S32205
- Super Duplex – S32750 , S32760, S31254(SMO254)
- Size Range of Seamless and Welded pipes and Tubes
- Outer Diameter Range – 6MM to 168.3MM (Seamless)
- Outer Diameter Range – 6MM to 273.0MM (Welded)
- Thickness Range – 0.7MM to 6MM
- Length Range – 3Mtr sto 12Mtr
- Chemical Industry
- LNG Pipelines
- Sea Water Pipelines
- Food and Beverages
- Oil and Gas Pipelines, etc.
Nickel Alloys also known as Super Alloys are those metals that contain more than 30% nickel. It is a hard and ductile metal of silver-white color. It has high corrosion resistance suitable for both high and low temperature applications. Nickel is a fair conductor of heat and electricity making it suitable for its use in furnaces, heat exchangers, aerospace engineering etc. Nickel has high metallurgical stability making it suitable for hard-metal industry. It also acts as a catalyst in various chemical processes.
Nickel alloys tubing products are made available at shalco in seamless and welded tubes and pipesCharacteristics- Corrosion & oxidation resistance
- Ductility
- Brilliant polish
- Excellent machine strength
- High creep resistance
- High temperature resistance
- Nickel 200 / 201
- Monel 400
- Monel K500
- Inconel 600
- Inconel 601
- Inconel 625
- Inconel 718
- Incoloy 800
- Incoloy 825
- Hastelloy C276
- Hastelloy C22
- Hastelloy B2
- Alloy 20
- 904L
- Pipes
- Tubes
- Fittings
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Yes! I am InterestedRequest A Callback
Nickel Alloy Pipes And Tube
Product Price: Rs 3,000 / KgGet Best Price
Product Brochure
Product Details:
| Size/Diameter | 1/2-3 inch |
| Application | Chemical Handling |
| Material | Nickel |
| Single Piece Length | 6 meter, 18 meter |
| Shape | Round |
| Nickel and Nickel Alloy Tubes | |
| ASTM B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes UNS N04400(Monel 400); UNS N06600(Inconel 600); UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT); UNS N08825(Incoloy 825) | |
| ASTM B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube UNS N04400(Monel 400) | |
| ASTM B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube UNS N06690(Inconel 690) | |
| ASTM B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube UNS N08800(Inconel 800); UNS N08810(Incoloy 800H); UNS N08811(Incoloy 800HT) | |
| ASTM B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825 and N08221)* Seamless Pipe and Tube UNS N08825(Incoloy 825) | |
| ASTM B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube UNS N06625(Incoloy 625) | |
| ASTM B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube UNS N10276(Hastelloy C276) | |
| ASTM B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube UNS N04400(Monel 400); UNS N06625(Incoloy 625) |
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Yes! I am InterestedRequest A Callback
Alloy 20 Pipe N08020 Alloy Tubing Tubes Pipe
Product Price: Rs 800 / KgGet Best Price
Product Brochure
Product Details:
| Material | Alloy 20 Pipe N08020 Alloy Tubing Tubes Pipe |
| Grade | ASTM B 464 N08020 Alloy 20 Pipe ASME SB 729 N08020 Alloy 20 Tubing ASME SB 468 N08020 Alloy 20 Tubes |
| Size/Diameter | 15-250NB |
| Brand | IMPORTED |
| Shape | Round |
| Product Type | Alloy 20 Pipe ASTM B729 N08020 DIN 17751 2.4660 is a high-corrosion resistant alloy, which shows ver |
Alloy 20 Pipe ASTM B729 N08020 DIN 17751 2.4660 is a high-corrosion resistant alloy, which shows very good resistance to phosphoric acid, nitric acid, sulfuric acid in chloric media. DIN 17751 2.4660 Alloy 20 is chiefly used in the chemical industry, apparatus engineering and heat exchanger.
Alloy 20 Carpenter 20, is a nickel-iron-chromium austenitic alloy that was developed for maximum resistance to acid attack, specifically sulfuric acid. This superalloy has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulfuric, phosphoric, and nitric acids. It also contains niobium for stabilization against sensitization and resultant intergranular corrosion.
Carpenter 20 combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication. Although originally designed for use in sulfuric acid related industries, Alloy 20 is now a popular choice for a wide variety of industries including the chemical, food, pharmaceutical, and plastics industries. In addition, this superalloy is used in heat exchangers, mixing tanks, metal cleaning and pickling equipment, and piping.
There has long been a debate on whether Carpenter 20 is a stainless steel or a nickel alloy because the nickel content is right on the border of defining it as one way or the other. So, depending on who you talk to this alloy may be referred to as alloy 20 Stainless Steel or as a nickel alloy. Either way it is still great for corrosion resistance.
ASTM B729 Alloy 20 N08020 Alloy Tubing Tubes Pipe have a good resistance properties to pitting and crevice corrosion and good resistance to intercrystalline corrosion, stress corrosion.
What are the characteristics of Alloy 20 N08020
- Excellent resistance to chloride stress corrosion cracking
- Excellent mechanical properties and fabricability
- Minimal carbide precipitation during welding
- Excellent in resisting corrosion to hot sulfuric acid
| Alloy | % | C | Mn | P | S | Si | Ni | Cr | Mo | Cu | Nb+Ta | Fe |
| ASME SB 729 N08020 | min. | - | - | - | - | - | 32.00 | 19.00 | 2.00 | 3.00 | 8×C | Rest |
| ASME SB 729 N08020 | max. | 0.07 | 2.00 | 0.045 | 0.035 | 1.00 | 38.00 | 21.00 | 3.00 | 4.00 | 1.00 |
Yes! I am InterestedRequest A Callback
Titanium Alloy Tube
Product Price: Rs 1,500 / KgGet Best Price
Product Brochure
Product Details:
| Grade | Grade 1 / 2 / 3 / 4 / 5 / 6 / 7 TUBES |
| Size/Diameter | 6.35 mm OD To 152 mm OD |
| Color | Silver |
| Material | Titanium ASTM B338,ASTM B861,DIN 17 861 |
| Shape | Round |
| Surface Finish | Polished |
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Yes! I am InterestedRequest A Callback
Haynes 188 /Haynes 25 / L605 /Waspalloy/ Nimonic C263 / RENE 41
Product Price: Rs 500 / KgGet Best Price
Minimum Order Quantity: 50 Kg
Product Details:
| Alloy | Haynes 188 /Haynes 25 / L605 /Waspalloy/ Nimonic C263 / RENE 41 |
| Shape | Round / Square/ Hex /Flat |
| Diameter | 3mm to 200mm |
| Condition | Solution Annealed |
| Length | Cut Length |
| Standards | HAYNES 25 (L605, Stellite 25, UNS R30605) AMS 5759, AMS 5537, UNS R30605 |
| Surface Finish | Bright |
| Usage | Chemical Plant, Marine, Aerospace, Power Plant, Oil Gas |
AMS 5759, AMS 5537, UNS R30605
Co Base, Ni 10.0, Cr 20.0, W 15.00, Mn 1.5, C 0.33, Si 0.40, Fe 3.00, S 0.030, P 0.040
High Performance Alloys stocks and produces HAYNES 25 (L605) in this grade in the following forms: Bar, wire spools, wire cuts, sheet/plate, strip, tube. Request quote on this grade.
Features
- Outstanding high temperature strength
- Oxidation resistant to 1800° F
- Galling resistant
- Resistant to marine environments, acids and body fluids
Properties
HAYNES 25 (L605) is a non-magnetic cobalt based superalloy. HAYNES 25 (L605) maintains good strength upto 2150°F. AMS 5759 requires minimum yield strength of 45,000 psi at room temperature. HAYNES 25 (L605) maintains good oxidation resistance up to 1900° F. HAYNES 25 (L605) has a unique ability to resist corrosion in very severe environments. Highly resistant to hydrochloric acid, nitric acid and wet chlorine (subject to need for exercising care in its selection at certain con¬centrations and temperatures)
Applications
- Gas turbine engine combustion chambers and afterburners
- High temperature ball bearings and bearing races
- Springs
- Heart valves
Chemistry
Chemical Requirements|
|
Ni |
Cr |
Mn |
Si |
Fe |
S |
Co |
|
Max |
11.00 |
21.00 |
2.00 |
0.40 |
3.00 |
0.030 |
Bal |
|
Min |
9.00 |
19.00 |
1.00 |
|
|
|
|
Tensile Data
Mechanical Property Requirements|
|
Ultimate Tensile |
Yield Strength (0.2% OS) |
Elong. in 4D % |
R/A |
Hardness |
|
Min |
125 Ksi |
45.0 KSi |
30 |
|
|
|
Max |
|
|
|
|
|
|
Min |
862 Mpa |
310 MPa |
|
|
|
|
Max |
|
|
|
|
|
Hardenability
HAYNES 25 (L605) hardness is typically 250 BHN and never higher than 275 BHN by specification. Not significantly hardenable. Does not respond to customary aging treatments, but strain aging at relatively low temperatures (700-1100° F) can improve creep and rupture strength when the alloy is in service at temperatures under 1300° F. Also, tensile and creep strength can be improved by cold working. HAYNES 25 (L605) is an austenitic alloy.
Additional Information:
- Production Capacity: HAYNES 25 (L605, Stellite 25, UNS R30605)
- Delivery Time: Ready Stock
- Packaging Details: Customber Choice
Yes! I am InterestedRequest A Callback
Inconel Nickel Alloy
Product Price: Rs 3,000 / KgGet Best Price
Product Brochure
Product Details:
| Grade | 201 |
| Color | Silver |
| Surface Finish | Polished |
| Shape | Round |
| Material | Nickel Alloy |
-
Special Alloy Incoloy 800H Hastelloy C-276 Inconel 600 Incoloy 800HT Hastelloy C-4 Inconel 601 Incoloy 825 Hastelloy B-2 Inconel 625 Incoloy 901 Hastelloy C-22 Inconel 718 Incoloy 926 Hastelloy B Inconel X-750 GH4169 Nimonic 80A 3J53 GH2132 Monel 400 904L 4J29 GH4145 Monel K-500 4J36 GH3128 254SMO/F44 Invar 36 GH3030 Incoloy A-286 Inconel 725 Incoloy 925 Incoloy 800 Hastelloy C Hastelloy X Nimonic 80A Nickel 200 Nickel 201 Nitronic 50 (XM-19) Nitronic 60 F15 F55 (S32760) F53 (2507) F51 (S31803) 329 (S32900) Alloy31 Alloy20Cb-3 17-4PH (S17400) 17-7PH (S17700) 15-5PH (XM-12) 15-7MoPH 253Ma A4 RS-2 Product Type Specification Forgings round Φ30-Φ350 square 30x30-350x350 Hot rolling material cake, flange, ring, sleeve Agreement round bar Φ8.5-Φ80 flat bar 4x60-50x300 Cold drawn material (Polishing) bar Φ2-Φ60 Tube & Pipe pierced billet Φ76-Φ200 cold drawn & cold rolled pipe Φ6.0x0.6mm-Φ200x20mm
Additional Information:
- Packaging Details: FORMS OF PACKING: Box packing Crate packing Bundle packing Jute or Hessian cloth packing Plastic wrapping Packing can also be done according to customers requirement.
Yes! I am InterestedRequest A Callback