EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- HEAT EXCHANGER SEAMLESS & ERW TUBES
HEAT EXCHANGER SEAMLESS & ERW TUBES
Pioneers in the industry, we offer astm a179/ asme sa179 heat exchanger tubes, heat exchanger tubes astm-a210, astm-a213(t11/t12/t22), astm-a333, seamless cold drawn precision tubes and pipes, condenser tube, shell and tube heat exchanger tubeastm astm a106, astm-a53, astm-a179, astm-a192,s and seamless heat resisting steel pipes & tubes acc to din/en from India.
ASTM A179/ ASME SA179 Heat Exchanger Tubes
Product Price: Rs 125 / KgGet Best Price
Product Brochure
Product Details:
| Material | SA179/ASTM A179 tubes are seamless, cold-drawn low-carbon steel tubes |
| Manufacturing Method | Seamless |
| Section Shape | ROUND / U SHAPED |
ASTM A179 ASME SA179M Standard
ASTM A179/A179M (ASME SA179)
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
1. Scope
1.1 This specification2 covers minimum-wall-thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus.
1.2 This specification covers tubes 1/8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter.
Note 1—Tubing smaller in outside diameter and having a thinner wall than indicated in this specification is available. Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside diameter or with a wall thickness under 0.015 in. [0.4 mm].
1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
2. Referenced Documents ASTM Standards
A450/A450M Specification for Carbon and Low Alloy Steel Tubes
3. General Requirements
Material furnished under this specification applicable Specification A450/A450M, unless otherwise provided herein.
3. Manufacture
Tubes shall cold drawn
5. Heat Treatment
Tubes shall be heat treated after the final cold draw pass at a temperature of 1200°F [650°C] or higher.
6. Surface Condition
Finished tubes shall be free of scale. A slight amount of oxidation will not be considered as scale.
7. Chemical Composition
8.1 The steel shall conform to the following requirements as to chemical composition:
|
Material |
Chemical Composition(%) |
||||
|
C |
Si |
Mn |
P |
S |
|
|
ASTM A179 |
0.06-0.18 |
≤ 0.25 |
0.27-0.63 |
≤0.035 |
≤0.035 |
8.2 Supplying an alloy grade that specifically requires the addition of any element other than those listed in 8.1 is not permitted.
9. Product Analysis
9.1 When requested on the purchase order, a product analy- sis shall be made by the supplier from 1 tube per 250 pieces or when tubes are identified by heat, one tube per heat shall be analyzed. The chemical composition thus determined shall conform to the requirements specified.
9.2 If the original test for product analysis fails, retests of two additional billets or tubes shall be made. Both retests, for the elements in question, shall meet the requirements of the specification; otherwise all remaining material in the heat or lot (Note 2) shall be rejected or, at the option of the producer, each billet or tube may be individually tested for acceptance. Billets or tubes which do not meet the requirements of the specifica- tion shall be rejected.
NOTE 2—A lot consists of 250 tubes.
Yes! I am InterestedRequest A Callback
Heat Exchanger Tubes ASTM-A210, ASTM-A213(T11/T12/T22), ASTM-A333
Product Price: Rs 125 / KgGet Best Price
Product Brochure
Product Details:
| Type | Heat Exchanger Tubes |
| Material Grade | > ASME / ASTM SA 179,SA 192,SA 178 |
| Usage/Application | Our heat exchanger tubes are used for the cooling,heating or re-heating of fluids,gases,and air i |
| Shape | ROUND |
| Withstanding Temperature | cold drawn and also be heat treated after cold drawn passes at temperature ranging 650 Deg C. |
| Frame Type | Steel |
| Nominal Size | Seamless tubes, diameter ranges from 10.2 to 139.7 millimeters, wall thickness ranges from 0.5 to 12 |
| Part Type | HEAT EXCHANGER & CNDERSOR SEAMLESS TUBES |
| Steel Grade | > ASME / ASTM SA 179, SA 192, SA 178 |
| Country of Origin | Made in India |
Additional Information:
- Packaging Details: Packing: Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Yes! I am InterestedRequest A Callback
Seamless Cold Drawn Precision Tubes and Pipes
Product Price: Rs 85 / KgGet Best Price
Product Brochure
Product Details:
| Unit Pipe Length | Customize |
| Shape | Round |
| Country of Origin | Made in India |
| Product Name | Standard | Grade | Size Range O.D. mm | Usage |
| Seamless Cold Drawn Precision Tubes | JIS G3445 | STKM 11A, STKM 12A, STKM 12B, STKM 12C, STKM 13A, STKM 13B, STKM 13C, STKM 15A, STKM 15C, STKM 17A, STKM 17C, STKM 18A | 6.00 to 88.90 | Mechanical and Automobile Precision Tubes |
| DIN2391 | ST35, ST45, ST52 | 6.00 to 76.00 | Seamless Precision Tubes | |
| ASME/ ASTM SA/A519 | SAE1010,
SAE1020, SAE1025, SAE1026, SAE1035, SAE1045, SAE4130 | 6.00 to 340.00 | Mechanical Precision Tubes | |
| EN10305-1 | E215, E235, E335 | 6.00 to 340.00 | Hydraulic Pressure Equipment | |
| ISO8535-1 | ST35, ST37, ST52 | 6.00 to 16.00 | High Precision High Pressure Fuel Pipes | |
| Cold Drawn Welded Precision Tubes | ASTM A513 | MT1010, 1015, 1020 | 21.70 to 90.00 | Automobile Shock Absorber Cylinder, Front and Rear Axle Structural Purpose,
Director Tubes, Engine Hydraulic Tubes |
| EN10305-2 | E215, E235, E335 | 10.00 to 90.00 | ||
| DIN2393 | S215, S235, S355 | 10.00 to 90.00 | ||
| DIN2394 | S215, S235, S355 | 10.00 to 90.00 |
Precision Cylinder Tubes, Honed Tubes.
Size: Outside Diameter: 6mm – 340mm, Wall Thickness: 1mm – 50mm
Standard: DIN2391, DIN2394, ASTM A519, JIS G3445 STKM
Application: used for Air Cylinder and Oil Cylinder, Oil Inlet Tubes and Gas Spring Tubes on Automobile, Bushing
Tubes.
Seamless cold drawn precision tubes and pipes are widely used for machine structural purpose, automobile, and hydraulic pressure equipment.
Yes! I am InterestedRequest A Callback
Condenser Tube
Product Price: Rs 5,000 / PieceGet Best Price
Product Brochure
Product Details:
| Shape | ROUND |
| Condenser Application | heating, cooling or reheating of fluids and gases, our precision tubes are commonly used in thermal |
| Primary Exchanger Material | Stainless Steel/ Carbon Steel / Duplex / Nickel Alloys / Cupro Nickel |
| Work Pressure | Condenser tubes are available in custom lengths |
MANUFACTURERS OF STAINLESS STEEL CARBON STEEL / DUPLEX / NICKEL ALLOYS / CUPRO NICKEL SHELL AND TUBE CONDENSER TUBES.
PUSHPAK offered Stainless Steel Carbon Steel / Duplex / Nickel Alloys / Cupro Nickel Condenser Tube Suppliers which is widespread in heat exchangers, from being part of a condenser and evaporator refrigeration cycle in a chiller, to condensing steam in surface condensers, and everything in between. Specially, these SS Condenser Tubing is commonly manufactured with an O.D. of ½” to 3" od Condenser Tubes and Seamless Condenser Tubes designed specifically for the role condenser tubes play in the heating, cooling or reheating of fluids and gases, our precision tubes are commonly used in thermal and nuclear power stations, as well as in the chemical processing plants.
STAINLESS STEEL CARBON STEEL / DUPLEX / NICKEL ALLOYS / CUPRO NICKLE CONDENSER TUBE SPECIFICATION
Specifications | ASTM A213, ASTM A249, ASTM A269 |
Size Range | 6 mm OD to 219.1 mm OD |
Outside Diameter | From 6mm~2500mm |
Length | 1 Mtr Upto 32 Mtrs Long / U-Tube Length – 32 Mtrs U Tube Coil – 50 Mtrs |
Thickness | 0.7 mm Thick To12.7 mm Thick |
Form | Seamless, Welded, Hot Rolled, Cold Drawn |
Shapes | Straight tube, Coil tubing |
Ends | Plain end, Bevelled end |
Grades | Stainless Steel Carbon Steel / Duplex / Nickel Alloys / Cupro Nickel |
Yes! I am InterestedRequest A Callback
Shell And Tube Heat Exchanger Tubeastm ASTM A106, ASTM-A53, ASTM-A179, ASTM-A192,S
Product Price: Rs 125 / KgGet Best Price
Product Brochure
Product Details:
| Usage/Application | Industrial |
| Material | CARBON STEEL STAINLESS STEEL, DUPLEX STAINLESS (304, 304L, 316, 316L, ETC.) MONEL, INCONEL, INCOLOY |
| Diameter | 10 to 101 MM OD . |
Shell And Tube Heat Exchanger Is The Most Demanded Heat Exchanger Due To Its Flexibility In Shape. Also, It Allows To Work In Wide Range Of Temperatures Without Any Hassle. Shell And Tube Heat Exchanger Transfers The Heat From One Gaseous Or Liquid Substance To Another By Maintaining The Heat Of One Substance To Another, It Balances It Correctly And Keep The Apparatus Risk Free. We Manufacture & Export Shell And Tube Heat Exchanger To USA, UK, Saudi Arabia, Europe, UAE, Spain, Germany, Australia, Oman, Abu Dhabi, India, Etc.
Yes! I am InterestedRequest A Callback
SEAMLESS HEAT RESISTING STEEL PIPES & TUBES ACC TO DIN/EN
Product Price: Rs 125 / KgGet Best Price
Product Brochure
Product Details:
| Material | Stainless Steel |
| Material Grade | DIN 17175 St 35.8, test category I+III 15Mo3 13CrMo4-4 10CrMo9-10 X10CrMoVNb9-1 X20CrMoV12-1 |
| Brand | PUSHPAK |
| Usage/Application | Boiler |
| Type | SEAMLESS HEAT RESISTING STEEL TUBES ACCORDING TO DIN/EN |
| Thickness | 10,2 x 813,0 mm thk: 1,0 - 80,0 mm |
| Surface Finish | Mill Finished |
| Unit Pipe Length | CUSTMIZE |
| DIN 17175 |
|---|
| St 35.8, test category I+III |
| 15Mo3 |
| 13CrMo4-4 |
| 10CrMo9-10 |
| X10CrMoVNb9-1 |
| X20CrMoV12-1 |
| EN 10216-2 |
|---|
| P235GH, test category 1+2 |
| 16Mo3 |
| 13CrMo4-5 |
| 10CrMo9-10 |
| 7CrMoVTiB10-10 |
| X10CrMoVNb9-1 |
| X20CrMoV11-1 |
| X10CrWMoVNb9-2 |
External diameter: 10,2 x 813,0 mm
Wall thickness: 1,0 - 80,0 mm
We are happy to inform you about special materials and dimensions on request.
Seamless heat resisting stainless steel tubesaccording to EN| EN 10216-5 |
|---|
| X6CrNiNbN25-20 |
| X10CrNiCuNb18-9-3 |
External diameter: 12,7 x 76,1 mm
Wall thickness: 3 - 10 mm
Yes! I am InterestedRequest A Callback
Heat Exchanger Tubes U Bend
Product Price: Rs 5,000 / KgGet Best Price
Minimum Order Quantity: 500 Kg
Product Brochure
Product Details:
| Manufacturing Method | Cold Drawn |
| Section Shape | U-Shaped |
| Material | CARBON STEEL / ALLOY STEEL STAINLESS STEEL / NICKEL ALLOYS /DUPLEX / COPPER BRASS SEAMLESS / ERW |
| Brand | PUSHPAK |
| Material Grade | CARBON STEEL / ALLOY STEEL STAINLESS STEEL / NICKEL ALLOYS /DUPLEX / COPPER BRASS SEAMLESS / ERW |
| Outer Diameter | 6.00 TO 101.40 MM |
| Length | Custom |
CARBON STEEL / ALLOY STEEL STAINLESS STEEL / NICKEL ALLOYS /DUPLEX / COPPER BRASS SEAMLESS / ERW HEAT U TUBES
|
TYPE |
U BEND TUBE |
|
|
MATERIAL OF MOC |
ALLOY STEEL / CARBON STEEL/ STAINLESS STEEL/ BOILER TUBES / DUPLEX /SUPER DUPLEX / NICKEL ALLOYS / TITANIUM / COPPER & BRASS ALLOYS. |
|
|
OUTSIDE DIAMETER |
6.00 TO 101.40 MM |
|
|
WALL THICKNESS |
0.85 TO 12.70 MM |
|
|
BENDING RADIUS (R) |
MIN 1.5 D TO MAX 1000 MM |
|
|
TUBE LENGTH (LEGS) |
1.0 TO 30.0 METER LONG |
|
|
HEAT TREATMENT |
STRESS RELIEVED AS PER TEMA |
|
|
MANUFACTURING PROCESS |
COLD DRAWN + PRECISION BENDING |
|
|
INSPECTION & CERTIFICATION |
EN 10204 3.1 / 3.2, TPI AVAILABLE |
|
|
SPECIFICATIONS |
ASTM, ASME, DIN EN, JIS ( JAPAN ), NF ( AFNOR ) |
|
|
APPLICABLE STANDARDS
|
· ASTM A209 / A213 /ASME SA213 / DIN 17175 / EN 10216-2/ JIS G3461 / G3462/ BS 3059/TEMA FOR STRESS RELIEF AND U-BEND QUALITY / IBR
|
|
|
CARBON STEEL |
A 179, A 192, A 210 (GRADE A1, C), A 334 (GRADE 1, 6 ),PART I (GRADE 320), PART II (GRADE 360, 440) ,BS 3602 PT-1, CFS 360,BS-980(CDS-1), ST35.8, ST45.8, |
|
|
ALLOY STEEL |
A 209 (GRADE T1, T1A), A 213 (GRADE T5, T11, T12, T22), A 556 (GRADE-A2-B2-C2) A 199(T5) ,15 MO3, 10CRMO44, 13CRMO910 |
|
|
STAINLESS STEEL |
TP-304, 304L, 304H, 304N, 304LN 316, 316L, 316H, 316TI, 316N, 316LN, 310, 317, 317L, 321, 321H, 347, 347H TP- 405, 410 |
|
|
DUPLEX / SUPER DUPLEX |
UNS S 31260, 31500, 31803, 32205, 32304, 32750, 32760 |
|
|
NICKEL ALLOYS |
INCONEL, HASTELLOY, MONEL |
|
|
TITANIUM |
TITANIUM -GRADES 1, 2, AND 5 |
|
|
COPPER / BRASS / CUPRO NICKEL ALLOYS |
· PHOSPHORIZED COPPER: C12200 (DHP - HIGH RESIDUAL PHOSPHORUS).COPPER-NICKEL ALLOYS: C70600 (90-10), C71500 (70-30).BRASS/ALUMINUM BRASS: C68700.OTHERS: C10200, C10800, C14200. ADMIRALTY BRASS, AND OTHER CU-ZN ALLOYS SUITABLE FOR HEAT EXCHANGE. |
Additional Information:
- Production Capacity: ALLOY/CARBON/STAINLESS STEEL/DUPLEX/NICKEL/TITANIUM/COPPER BRASS ALLOYS
- Delivery Time: 3-4 WEEKS
- Packaging Details: AS PER CUSTOMBER REQUIRED
Yes! I am InterestedRequest A Callback
U Bend Tubes For Heat Exchangers
Product Price: Rs 150 / PieceGet Best Price
Product Brochure
Product Details:
| Material | Carbon Stainless Copper Titanium |
| Bend Radius | Bending Data: According to Bending Drawings. |
| Bend Angle | Bending Data: According to Bending Drawings. |
| End Connection Type | Bending Data: According to Bending Drawings. |
| Usage/Application | Oil & Gas plants |
| Size | O.D.: 19.05 to 38.1mm |
| Thickness | O.D.: 19.05 to 88.9mm |
| Grade | Standard: ASTM A179, ASTM A192, ASTM A210 |
| Country of Origin | Made in India |
| |||||||||||||||||||||||||||||||||||||||||||||||||
Additional Information:
- Packaging Details: wooden box
Yes! I am InterestedRequest A Callback